Trusted Rome GA Electrical Team

Looking for a professional Rome electrician? Wright Electrical offers certified and bonded specialists for code-compliant services. You can expect precise load calculations, service panel updates, dedicated circuits for heating/cooling and EV systems, and neat, professional installations. Our services include electrical assessments, breaker maintenance, lighting retrofits with intelligent systems, and EV charging solutions meeting Article 625. Depend on our 24/7 emergency service, precision-tested connections, certified inspections, and detailed pricing with written warranties. Find out how we secure your property and optimize system efficiency right away.

Core Findings

• We provide commercial and residential electrical solutions, including installations, repairs, and upgrades, completed following NEC-compliant workmanship and engineered designs.
• Safety inspections and compliance verification with comprehensive issue documentation, visual evidence and ordered solutions; emergency and after-hours fault isolation and restoration.
• Panel modifications and upgrades, including detailed load calculations, phase balancing, custom circuit installations for heating/cooling, electric vehicles, and technology systems, and torque-certified terminations with detailed and organized panel directories.
• Lighting design and LED retrofits with photometric layouts, smart controls, compliance with IECC and ASHRAE standards, and utility incentive guidance.
• EV charging system analysis and implementation, along with service compliant with NEC Article 625, featuring intelligent connectivity features, GFCI protection, and routine system checks.

Residential Electrical Repairs and Upgrades

Modernize your home electrical setup with precise repairs and code-compliant upgrades that boost system safety, electrical capacity, and performance. You'll receive accurate assessments, straightforward solutions, and code-compliant service from main panel to outlet. We analyze power requirements, resolve grounding and bonding issues, and upgrade hazardous wiring or components.

We focus on replacing electrical outlets that are damaged, lack grounding, or require GFCI/AFCI protection in required locations. Our panel upgrades include proper breaker sizing, clear labeling, and torque-verified connections. For overloaded circuits, we install dedicated lines for heating and cooling units, cooking appliances, EV charging points, and workshop equipment.

Boost your home's safety with complete surge protection at the service level and device-level protection for delicate electronics. We perform voltage drop correction, load distribution and verify fault-clearing times. You'll experience improved operation, consistent power, and capacity for future growth.

Expert Electrical Services for Rome Companies

Energize your business with commercial-grade electrical systems designed for Rome's regulations, capacity needs, and deadlines. You receive technical specifications, precise installations, and verified performance for shops, workplaces, eateries, and industrial properties. We size services and feeders correctly, balance phases, and incorporate commercial load management so your panels, transformers, and distribution gear run efficiently without nuisance trips.

We manage new construction and renovation projects, including electrical outlet fitting, custom circuits for retail systems and network infrastructure, code-compliant safety circuits, and dedicated ground circuits for precision hardware. We implement LED lighting systems with smart controls, safety lighting systems, and occupancy/photo sensors to cut operating costs. We manage necessary permits, utility connections, and service interruptions to reduce service interruptions. We provide comprehensive documentation, circuit directories, and system labeling to simplify future modifications.

Code Compliance and Safety Inspections

Even when things look to function correctly, a thorough safety check confirms your electrical system adheres to NEC and City of Rome regulations and functions within intended specifications. Our team assesses grounding systems, connection integrity, GFCI/AFCI safety devices, conductor sizing, component specifications, and enclosure condition. We check proper labeling, operational spacing, and current protection adequacy. Following a organized inspection protocol, we evaluate outlets, confirm electrical polarity, and evaluate voltage drop on selected circuits.

We examine occupancy-related specifications, load calculations, and equipment listing/labeling. Upon finding deficiencies, we document them with remedial actions aligned to current code requirements. You'll be given a detailed assessment, documentation, and conformity recommendations to help you plan budgeting and scheduling for corrections. Our objective is to minimize safety risks, fire hazards, and unnecessary shutdowns while ensuring insurance and permitting compliance.

Panel Upgrades and Circuit Breaker Services

Update overloaded or obsolete panels with up-to-code capacity that aligns with your existing and projected load. Our team assesses service size, conductor specifications, ground connections, and short-circuit ratings to select the optimal main panel or subpanels. You'll get properly dimensioned feeders, neutral bars, and AFCI/GFCI solutions when necessary. Our team conducts load calculations according to NEC Article 220, then distribute circuits for proper load balancing across phases.

Our service includes replacing damaged breakers, fixing double-lugging issues, and installing properly rated breakers for your panel. Your overcurrent protection is set to protect conductors without nuisance trips, incorporating motor-specific delays and selective coordination as required. Our process includes directory labeling, precise torque applications, and clearance verification. After installation, we test fault paths, tighten lugs, and document permits and inspections.

Professional Lighting Services and Retrofitting

You'll receive tailored illumination designs designed for proper illuminance, electrical load management, and code-compliant electrical installations. Our team implements high-performance LED solutions that reduce power consumption, enhance light quality, and comply with Title 24/ASHRAE standards where applicable. We also integrate intelligent lighting systems-scheduling, occupancy detection, and dimming capabilities-for code-acceptable automation and documented efficiency gains.

Bespoke Lighting Arrangements

From design to execution, tailored illumination strategies harmonize your space's function, aesthetics, and code requirements. We analyze spatial utilization, vertical dimensions, surface properties, and system operations to establish illumination parameters and environmental sectors. Next, we coordinate light fixture locations for consistent illumination, focused lighting, and reflection management, complying with NEC load calculations, box fill, and grounding, as well as area-specific energy requirements for operational controls.

We'll provide photometric layouts verifying foot-candle targets, lighting temperature selections by use case, and dimming systems that integrate with automated systems or central management. We detail circuiting, switch placement, and emergency exit illumination according to standards. While installing, we confirm mounting heights, beam orientation, and system integration, then program presets and automation. The end result is reliable, optimized lighting that enhances how you live and work.

Professional LED Conversions

Beginning with a well-planned lighting layout, efficient LED retrofits convert existing fixtures to higher efficacy sources while keeping intended light levels and code compliance. You'll reduce wattage, enhance uniformity, and meet lumen targets by selecting DLC- or Energy Star-listed retrofit components compatible with existing optics. We validate ballast compatibility or switch to dedicated drivers, then document input watts and delivered lumens for code calculations.

Proper thermal management helps protect LED longevity through temperature checks, proper heat sinking, and appropriate fixtures, specifically for enclosed and recessed fixture types. We ensure proper voltage, dimming compatibility, and surge protection and ensure NEC-compliant circuit identification. To minimize your total investment, we locate utility retrofit rebates, handle required submittals, and deliver comprehensive photometric data and cut sheets, guaranteeing safe installation, warranty compliance, and documented energy reduction.

Intelligent Control System Integration

Although fixtures create the base, intelligent controls deliver the accuracy: we create and set up integrated lighting controls conforming to IECC/ASHRAE 90.1 and NEC requirements, integrating sensors for occupancy/vacancy, daylight harvesting, high-end trimming, and scheduling per room category. We commission devices, confirm operational sequences, and document settings for inspection.

You'll find intuitive management solutions-keypads, mobile apps, and voice control-protected by secure network segmentation and grounding protocols. We implement BACnet or Modbus when appropriate, permitting facility systems to share data. Management interfaces display load profiles, demand peaks, and savings, helping you fine-tune setpoints and trim levels.

For retrofit installations, we utilize existing circuits where possible, add UL-listed control relays, and ensure panels are labeled according to NEC 110.22. Following completion, we provide comprehensive staff training and deliver as-builts and maintenance guidelines.

Intelligent Home Systems and Automation

The foundation of intelligent upgrades begins with a solid electrical infrastructure: code-compliant circuits, appropriately sized panels, and low-voltage pathways that enable your smart technology. We implement structured wiring, comprehensive Wi‑Fi coverage, and protected PoE for touchscreens, cameras, and access points. You'll experience seamless scenes, reliable voice control, and responsive automations without compromising electrical codes or overloading systems.

We integrate different smart technologies into a single system, then establish safety measures for power outages and network loss. Our team analyzes power requirements, identifies endpoints, and creates isolated networks to isolate IoT traffic. With precise tracking and consumption analysis, you can monitor usage, set demand limits, and maximize energy reduction. We'll document firmware, generate system copies, and maintain update harmony.

EV Charger Installation and Support

We evaluate your home electric vehicle charging options by checking electrical capacity, available panel space, and circuit needs to propose the most appropriate EV charging units from Level 1 to smart networked solutions that comply with NEC and CEI standards. Our professional installation includes dedicated circuits, code-compliant GFCI protection and UL-listed equipment with full permitting and ground protection. Additionally, we provide scheduled system maintenance, firmware updates, and quick problem resolution for operational problems including fault conditions, unexpected shutdowns, and network connection issues.

Home EV Charger Options

Residential charging options allow you to fuel your electric vehicle efficiently, securely, and at your convenience, but picking the perfect choice depends on your car, usage patterns, and power setup. You can get started with a portable charging solution using the OEM cordset for intermittent charging, but most residents opt for a Level 2 station (208-240V) for quicker daily charging. We'll configure amperage to your vehicle's charging system and electrical panel, verify dedicated circuits, and set up code-compliant GFCI protection as needed.

Intelligent systems include Wi‑Fi, energy metrics, and home load management, coordinating with additional large devices to avoid power overloads. Permanently installed units deliver better weather resistance and increased continuous ratings; plug‑in versions give flexibility with outlet options and travel-ready attachments. We'll ensure proper breaker sizing, conduit, bonding, and labeling to satisfy NEC and manufacturer specifications.

Service and Problem Solving

Even though EV charging equipment requires minimal upkeep, you can ensure dependable operation by performing periodic evaluations and fixing issues without delay. Conduct preventive checks on cables, connectors, and mounting hardware; inspect for heat-related marks, damaged insulation, or loose terminations. Test and verify GFCI/AFCI operation, verify emergency shutoff controls, and confirm breaker labeling complies with NEC Article 625. Ensure proper airflow and update firmware regularly.

While performing diagnostics, begin by checking voltage measurements at the breaker, disconnect, and charger terminals to confirm proper line voltage and balanced phases. Inspect earth continuity, connections, and terminal torque to OEM requirements. Review diagnostic codes, signal quality, and network status for smart chargers. When experiencing unexpected shutdowns, evaluate circuit loads, capacity adjustments, and temperature factors. Log test results, adjust fasteners to proper specs, and install new components using certified replacements. Reach out to a certified electrician for persistent faults.

24/7 Emergency Electrical Services

During electrical failures, breakers keep tripping, or you smell burning insulation during off-hours, it's essential to have a certified electrician who offers immediate response and ensure safe conditions. We provide swift troubleshooting at the service panel, branch circuits, and devices to identify problems and address safety hazards. Our surge protection response addresses storm-related damage, failed surge protectors, and nuisance tripping, verifying electrical grounds as per NEC requirements. For night repairs, we secure electrical conductors, replace compromised breakers, and fix loose connections that cause overheating and electrical arcing.

Our experts arrive in fully equipped vehicles for holiday and Weekend service, using calibrated meters, IR scanning, and LOTO procedures. Our team restores essential circuits, inspect and test ground fault and arc fault protection, and check electrical balance on shared neutral circuits. Before power restoration, we execute here detailed continuity analysis and document all corrections for code compliance.

Clear Pricing and Warranty Details

You can expect comprehensive quotes that break down labor, materials, permits, and disposal costs enabling you to confirm compliance with local codes. We clearly document all rates, costs, and potential contingencies before commencing work, and we don't move forward without your written approval. We include detailed warranty terms that outline coverage duration, inclusions/exclusions, response times, and transferability.

Clear, Itemized Estimates

Eliminate uncertainty with detailed, transparent pricing that outline all costs including work, supplies, permits and cleanup so you have complete pricing clarity before work begins. We itemize every aspect from fixtures to electrical panels and safety upgrades, so your detailed quotes align with NEC and local Rome inspections. You'll see itemized expenses for setup, completion, testing, and certification, plus any trenching, GFCI/AFCI protection, or surge components.

We offer clear upfront pricing that lets you compare all options - such as fixture tiers, conductor sizes, and load-calculation outcomes - without unexpected costs. Should circumstances differ, we provide a complete written change order outlining updated materials and time requirements before moving forward. You maintain full approval authority. Expect detailed timeline planning, mobilization specifics, and permit coordination, securing code-compliant work, reliable expenses, and zero surprises throughout the project.

Clear Warranty Terms

Since transparency secures your investment, our warranty clearly defines terms, timeframes, and limitations in straightforward terms tied to code-compliant work. You'll be clear about what materials, services, and craftsmanship we guarantee, and for how long, so you can plan maintenance and budgeting confidently. We record serial numbers, certifications, inspection reports, and testing results to support clear warranty terms and confirm adherence to NEC and local amendments.

If a problem arises, you'll go through a straightforward warranty process: contact us, send the receipt and pictures, and we set up diagnostics within a specified timeframe. Upon confirmation of a covered problem, we repair or replace to restore safe operation, with no extra workforce expenses. Consumable parts, abuse, or external modifications are excluded from coverage, and we clarify these limitations in advance.

The Reason Rome Residents Depend on Wright Electrical

Most Rome homeowners trust Wright Electrical for code-compliant work completed by licensed and insured technicians who prioritize safety and precision. You obtain transparent work details, stamped permits, and installations that comply with the latest NEC and local AHJ requirements. Teams arrive with properly maintained testers, arc-fault and GFCI verification tools, and adhere to lockout/tagout procedures on all service appointment.

You can count on detailed technical analysis, load computations, and panel marking that make easier ongoing upkeep. Technicians document electrical connections, grounding systems, and wire specifications, while supplying as-built photos for your records. Service scheduling is dependable, and initial quotes accurately reflect final costs.

Nearby residents verify reliable outcomes - our local reputation grows via local recommendations after professional, code-compliant installations. From EV circuits to electrical system updates, you obtain verified, certified installations that meet standards immediately and function securely.

Questions and Answers

Are All Your Electricians Licensed, Bonded, and Screened?

Indeed. We provide qualified professionals who satisfy regulatory requirements, maintain complete liability and bonding protection, and complete rigorous background screening. Our annual credential verification process maintain active permits, and comply with current electrical codes. You'll receive identity verification upon arrival, proof of insurance coverage, and verified safe driving history. We maintain certification for equipment safety, electrical hazard protection, and industry safety standards, ensuring your protection against legal, financial, and safety concerns.

What Parts of Rome Are In Your Service Area?

We provide service to Downtown Rome, East Rome neighborhoods, West Rome, Mount Berry, Shannon, Garden Lakes, Coosa, Horseleg Creek, Riverside, Between-the-Rivers, College Heights, Desoto Hill, Maplewood, North Rome, Saddle Mountain, and nearby Floyd County areas. You'll find us handling power hiccups with precision and code compliance, overseeing permits, load calculations, and National Electrical Code compliant work. For locations beyond city boundaries, we'll confirm coverage zones, travel costs, and scheduling options to keep your project timely and inspection-ready.

How Quickly Can I Get an On-Site Estimate?

Our team can generally get an on-site estimate the same day, subject to scheduling and safety considerations. Call before 10 a.m. for priority scheduling; we'll verify access requirements, service panel access, and code compliance needs. If weekdays don't work for you, we offer weekend appointments at regular inspection fees. We'll provide a detailed written estimate during our visit, detailing labor, materials, and permit requirements. Upon approval, we can schedule the work immediately or complete small fixes during the visit.

Can You Process Permits With the City of Rome?

We handle permit coordination with the City of Rome. You can rely on us to handle all documentation - we process applications, provide drawings, and oversee communications with the city until approval. We ensure everything aligns with NEC and local amendments, coordinate inspections, and address redlines promptly. We'll provide clear timelines and status updates. If structural or utility reviews are needed, we manage all related specialties. You confirm the project details; we manage all compliance and paperwork until completion until project completion.

Which Materials and Brands Are Commonly Used?

You typically see essential electrical elements including copper wiring, LED fixtures, circuit breakers, and whole-house surge protection from industry-leading names including Square D, Eaton, Leviton, and Halo. When you replace a 1960s panel, you'll receive AFCI/GFCI breakers, copper branch circuits, and dimmable LED fixtures, all following National Electrical Code requirements. You'll also be provided with UL-listed surge protection at both the main service and individual outlets. You'll experience energy savings, safer fault interruption, and cleaner voltage.

Closing Remarks

You've seen how code-compliant repairs, accurate upgrades, and clear pricing maintain your establishment protected and optimized. You know Wright Electrical handles all electrical needs, from inspections to emergencies with qualified, insured experts who adhere to NEC standards. When the power fluctuates, breakers trip, or time is critical, will you chance disruption-or reach out to the team Rome depends on? You're one step from consistent power, certified security, and guaranteed service. Don't postpone until issues develop. Get in touch now-and stay ahead of it.